Details

Edité par

HELIROMANDY
Vendu par

HELIROMANDY
Taille
68.95MB
Disponible depuis
2026-10-04
Version
1.1.0
PID
21650

STOP GUESSING. START HOOKING.

You hover. You squint at the tiny dot far below. You lean left, you lean right. You switch to external view for the tenth time.

Real helicopter crews don't work like that. A crew chief leans out of the door and talks you down: "Load twelve o'clock, 80 meters… forward 10, right 5… easy… load directly below… down 5… hold position… hooked up!"

Virtual Crew brings that crew chief into your simulator.

TWO MISSION MODES, ONE TOOL

Sling / Hoist. Drop a pin on the satellite map where the load is. Virtual Crew tracks your hook, not your cabin, and guides you from the first nautical mile to "Hooked up", then to "Load clear."

Precision Landing. Helipad, rooftop, confined area, mountain landing zone, patient pickup. Set the point and the landing heading, then fly. You hear the approach, the corrections, the heading calls and finally "Touchdown… right on the mark!"

A REAL HUMAN VOICE

No robotic text-to-speech. Every callout is recorded by a real person and processed with a cockpit-intercom sound, so it sounds like a crewmate beside you, not a GPS.

CALLOUTS THAT HELP, NOT SPAM

Silent until 5 NM from the target
One clear call per nautical mile on the way in (5, 4, 3)
Continuous guidance in the last 2 NM
Smart anti-spam logic: no flood of messages for a tiny deviation
"Easy" when you close in too fast
"Stop! Up up up" when your hook is dropping onto the load and you are not above it

KEEP YOUR EYES OUTSIDE THE COCKPIT, NOT ON A SCREEN

Clock-position and distance calls: "Load two o'clock, 80 meters"
Forward, back, left and right corrections in meters or feet
Vertical guidance down to "Hold position"
A live radar view (top-down, nose up) with a vertical gauge
A satellite map to place your load or landing point anywhere in the world

DESIGNED FOR REAL SIMMERS

Works with MSFS 2024, MSFS 2020 and X-Plane 12: one product, all your simulators
External app: nothing to install into the simulator, no add-on conflicts, no config files to edit
Works with the helicopter you already own
Adjustable cable length (short, standard, long line, forest/mountain 50 m, or custom)
Raised loads (roofs, platforms) supported
Recalibrate in one keypress when you hover right above the target
Global hotkeys that work while the sim has the focus
Meters or feet
Built-in demo mode to try it without a simulator
Step-by-step manual included

PERFECT FOR

Long-line and external-load operations, HEMS and rescue missions, mountain and forest work, firefighting and construction lifts, offshore and rooftop landings, virtual airline pilots, and anyone who wants helicopter flying to feel professional.